Selective Extraction and Quantification of Hemoglobin Based on a Novel Molecularly Imprinted Nanopolymeric Structure of Poly(acrylamide-vinyl imidazole).

Imbalances in hemoglobin (Hb) levels can lead to conditions such as anemia or polycythemia, emphasizing the importance of precise Hb extraction from blood. To address this, a novel synthetic imprinted polymer was meticulously developed for capturing and separating Hb. Poly(acrylamide-vinylimidazole) nanopolymer (poly(AAm-VIM)) was synthesized using acrylamide and vinyl imidazole as functional monomers through surfactant-free emulsion polymerization. Characterization using FTIR, particle size, zeta potential, and SEM ensured the polymer's structure. The Hb-imprinted nanopolymer (Hb-poly(AAm-VIM)) demonstrated notable specificity, with a calculated Hb-specific adsorption value (Qmax) of 3.7377 mg/g in a medium containing 2.5 mg/mL Hb. The molecularly imprinted polymer (MIP) exhibited approximately 5 times higher Hb adsorption than the nonimprinted polymer (NIP). Under the same conditions, the imprinted nanopolymer displayed 2.39 and 2.17 times greater selectivity for Hb over competing proteins such as bovine serum albumin (BSA) and lysozyme (Lys), respectively. Also, SDS-PAGE analysis results confirmed the purification of Hb by the molecularly imprinted nanopolymer. These results underscore the heightened specificity and efficacy of the molecularly imprinted nanopolymer in selectively targeting Hb atoms among other proteins. Incorporating such polymers is justified by their notable affinity, cost-effectiveness, and facile production. This research contributes valuable insights into optimizing synthetic imprinted polymers for efficient Hb extraction, with potential in medical diagnostics and treatment applications.

Affinity-Based Magnetic Nanoparticle Development for Cancer Stem Cell Isolation.

Cancer is still the leading cause of death in the world despite the developing research and treatment opportunities. Failure of these treatments is generally associated with cancer stem cells (CSCs), which cause metastasis and are defined by their resistance to radio- and chemotherapy. Although known stem cell isolation methods are not sufficient for CSC isolation, they also bring a burden in terms of cost. The aim of this study is to develop a high-efficiency, low-cost, specific method for cancer stem cell isolation with magnetic functional nanoparticles. This study, unlike the stem cell isolation techniques (MACS, FACS) used today, was aimed to isolate cancer stem cells (separation of CD133+ cells) with nanoparticles with specific affinity and modification properties. For this purpose, affinity-based magnetic nanoparticles were synthesized and characterized by providing surface activity and chemical reactivity, as well as making surface modifications necessary for both lectin affinity and metal affinity interactions. In the other part of the study, synthesized and characterized functional polymeric magnetic nanoparticles were used for the isolation of CSC from the human osteosarcoma cancer cell line (SAOS-2) with a cancer stem cell subpopulation bearing the CD133 surface marker. The success and efficiency of separation after stem cell isolation were evaluated via the MACS and FACS methods. As a result, when the His-graft-mg-p(HEMA) nanoparticle was used at a concentration of 0.1 µg/mL for 106 and 108 cells, superior separation efficiency to commercial microbeads was obtained.

Impact of a Polymer-Based Nanoparticle with Formoterol Drug as Nanocarrier System In Vitro and in an Experimental Asthmatic Model.

The implementation of nanotechnology in pulmonary delivery systems might result in better and more specific therapy. Therefore, a nano-sized drug carrier should be toxicologically inert and not induce adverse effects. We aimed to investigate the responses of a polymer nano drug carrier, a lysine poly-hydroxyethyl methacrylate nanoparticle (NP) [Lys-p(HEMA)], loaded with formoterol, both in vitro and in vivo in an ovalbumin (OVA) asthma model. The successfully synthesized nanodrug formulation showed an expectedly steady in vitro release profile. There was no sign of in vitro toxicity, and the 16HBE and THP-1 cell lines remained vital after exposure to the nanocarrier, both loaded and unloaded. In an experimental asthma model (Balb/c mice) of ovalbumin sensitization and challenge, the nanocarrier loaded and unloaded with formoterol was tested in a preventive strategy and compared to treatment with the drug in a normal formulation. The airway hyperresponsiveness (AHR) and pulmonary inflammation in the bronchoalveolar lavage (BAL), both cellular and biochemical, were assessed. The application of formoterol as a regular drug and the unloaded and formoterol-loaded NP in OVA-sensitized mice followed by a saline challenge was not different from the control group. Yet, both the NP formulation and the normal drug application led to a more deteriorated lung function and increased lung inflammation in the OVA-sensitized and -challenged mice, showing that the use of the p(HEMA) nanocarrier loaded with formoterol needs more extensive testing before it can be applied in clinical settings.

L-glutamic acid-g-poly hydroxyethyl methacrylate nanoparticles: acute and sub-acute toxicity and biodistribution potential in mice.

The aim of this safety study in mice was to determine in vivo toxicity and biodistribution potential of a single and multiple doses of L-glutamic acid-g-p(HEMA) polymeric nanoparticles as a drug delivery system. The single dose did not cause any lethal effect, and its acute oral LD50 was >2.000 mg/kg body weight (bw). Multiple doses (25, 50, or 100 mg/kg bw) given over 28 days resulted in no significant differences in body and relative organ weights compared to control. These results are supported by biochemical and histological findings. Moreover, nanoparticle exposure did not result in statistically significant differences in micronucleus counts in bone marrow cells compared to control. Nanoparticle distribution was time-dependent, and they reached the organs and even bone marrow by hour 6, as established by ex vivo imaging with the IVIS® spectrum imaging system. In conclusion, L-glutamic acid-g-p(HEMA) polymeric nanoparticles appear biocompatible and have a potential use as a drug delivery system.

Polymeric nanoparticle-based electrochemical sensor for the detection of CA 125.

In this paper, Cys-graft-p(HEMA) nanomaterials and a new electrochemical method were developed for determination of CA 125. Cys-graft-p(HEMA) nanomaterials were synthesized with emulsion polymerization method and modified with grafting procedure. It was determined that Cys-graft-p(HEMA) nanomaterials had 50 nm dimension and spherical morphology, and per gram polymeric material contained 0.011 mmol L-cysteine. Electrode surface was prepared step by step for electrochemical analysis with optimization process. Linear determination range was determined as 5-400 U/mL (R= 0.9935). Detection limit (LOD) was calculated as 1.87 U/mL, and quantification limit (LOQ) was determined as 5.62 U/mL. The fabricated sensor system showed good repeatability, accuracy, reality, and storage stability. According to the results obtained, Cys-graft p(HEMA) nanomaterials that is used for the first time in biosensor has the potential to find use in the sector with rapid determination time (10 min), extensive determination range, accuracy of methods. Novelties of this study are rapid analysis, determination range, appropriate of prototype device development, and developing new designed material. Developed material and method can be used in the preliminary diagnosis of the disease and combined with a prototype device that can allow the follow-up of the treatment process in diagnosed patients.

Metal-Chelated Polymeric Nanomaterials for the Removal of Penicillin G Contamination.

We developed selective and relatively low-cost metal-chelated nanoparticle systems for the removal of the penicillin G (Pen G) antibiotic, presented for the first time in the literature. In the nanosystem, poly(glycidyl methacrylate) nanoparticles were synthesized by a surfactant-free emulsion polymerization method and covalently bound with a tridentate-chelating ligand, iminodiacetic acid, based on the immobilized metal chelate affinity technique. It was modified with Cu2+, a chelating metal, to make Pen G specific. Metal-chelated nanoparticles were characterized by Fourier-transform infrared spectroscopy, energy dispersive spectrometry, zeta dimensional analysis, and scanning electron microscopy technology. Optimization studies of the Pen G removal were conducted. As a result of this study, Pen G removal with the p(GMA)-IDA-Cu2+ nanoparticle reached its maximum adsorption capacity of 633.92 mg/g in the short time of 15 min. The Pen G adsorption of p(GMA)-IDA-Cu2+ was three times more than that of the p(GMA) nanoparticles and two times more than that of the ampicillin adsorption. In addition, there was no significant decrease in the adsorption capacity of Pen G resulting from the repeated adsorption-desorption process of metal-chelated nanoparticles over five cycles. The metal-chelated nanoparticle had an 84.5% ability to regain its ability to regenerate the product with its regeneration capability, making the widespread use of the system very convenient in terms of reducing cost, an important factor in removal processes.

Green Carbon Dots: Synthesis, Characterization, Properties and Biomedical Applications.

Carbon dots (CDs) are a new category of crystalline, quasi-spherical fluorescence, "zero-dimensional" carbon nanomaterials with a spatial size between 1 nm to 10 nm and have gained widespread attention in recent years. Green CDs are carbon dots synthesised from renewable biomass such as agro-waste, plants or medicinal plants and other organic biomaterials. Plant-mediated synthesis of CDs is a green chemistry approach that connects nanotechnology with the green synthesis of CDs. Notably, CDs made with green technology are economical and far superior to those manufactured with physicochemical methods due to their exclusive benefits, such as being affordable, having high stability, having a simple protocol, and being safer and eco-benign. Green CDs can be synthesized by using ultrasonic strategy, chemical oxidation, carbonization, solvothermal and hydrothermal processes, and microwave irradiation using various plant-based organic resources. CDs made by green technology have diverse applications in biomedical fields such as bioimaging, biosensing and nanomedicine, which are ascribed to their unique properties, including excellent luminescence effect, strong stability and good biocompatibility. This review mainly focuses on green CDs synthesis, characterization techniques, beneficial properties of plant resource-based green CDs and their biomedical applications. This review article also looks at the research gaps and future research directions for the continuous deepening of the exploration of green CDs.

Novel Polymeric Nanomaterial Based on Poly(Hydroxyethyl Methacrylate-Methacryloylamidophenylalanine) for Hypertension Treatment: Properties and Drug Release Characteristics.

In this study, a novel polymeric nanomaterial was synthesized and characterized, and it its potential usability in hypertension treatment was demonstrated. For these purposes, a poly(hydroxyethyl methacrylate-methacryloylamidophenylalanine)-based polymeric nanomaterial (p(HEMPA)) was synthesized using a mini-emulsion polymerization technique. The nanomaterials were characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and zeta size analysis. The synthesized p(HEMPA) nanomaterial had a diameter of about 113 nm. Amlodipine-binding studies were optimized by changing the reaction conditions. Under optimum conditions, amlodipine's maximum adsorption value (Qmax) of the p(HEMPA) nanopolymer was found to be 145.8 mg/g. In vitro controlled drug release rates of amlodipine, bound to the nanopolymer at the optimum conditions, were studied with the dialysis method in a simulated gastrointestinal system with pH values of 1.2, 6.8 and 7.4. It was found that 99.5% of amlodipine loaded on the nanomaterial was released at pH 7.4 and 72 h. Even after 72 h, no difference was observed in the release of AML. It can be said that the synthesized nanomaterial is suitable for oral amlodipine release. In conclusion, the synthesized nanomaterial was studied for the first time in the literature as a drug delivery system for use in the treatment of hypertension. In addition, AML-p(HEMPA) nanomaterials may enable less frequent drug uptake, have higher bioavailability, and allow for prolonged release with minimal side effects.

Synthesis and Characterization of a New Cryogel Matrix for Covalent Immobilization of Catalase.

The advantages of cryogels for enzyme immobilization applications include their mechanical and chemical robustness, ease of production, superior porosity, and low cost. Currently, many researchers are exploring porous material-based systems for enzyme immobilization that are more efficient and economically viable. Here, poly(2-Hydroxyethyl methacrylate-co-allyl glycidyl ether) (p(HEMA-co-AGE)) cryogel matrices were synthesized via the free radical cryopolymerization method to be employed as the support material. For the immobilization of the catalase enzyme onto the p(HEMA-co-AGE) cryogel matrix (catalase@p(HEMA-co-AGE), the best possible reaction conditions were determined by altering parameters such as pH, catalase initial concentration, and flow rate. The maximum catalase immobilization amount onto the p(HEMA-co-AGE) cryogel was found to be 48 mg/g cryogel. To determine the advantages of the cryogel matrix, e.g., the stability and reusability of the cryogel matrix, the adsorption-desorption cycles for the catalase enzyme were repeated five times using the same cryogel matrix. At the end of the reusability tests, it was found that the cryogel was very stable and maintained its adsorption capacity with the recovery ratio of 93.8 ± 1.2%. Therefore, the p(HEMA-co-AGE) cryogel matrix affords repeated useability, e.g., up to five times, without decreasing its catalase binding capacities significantly and has promising potential for many industrial applications. Cryogels offer clear distinctive advantages over common materials, e.g., micro/nano particles, hydrogels, films, and composites for these applications. At present, many researchers are working on the design of more effective and economically feasible, porous material-based systems for enzyme immobilization.

p(HEMA)-RR241 hydrogel membranes with micron network for IgG depletion in proteomic studies.

Serum proteins can generally be considered a good source for the illness' indication and are precious resources to detect diseases such as inflammation, cancer, diabetes, malnutrition, cardiovascular diseases, Alzheimer's, other autoimmune diseases, and infections. However, one of the biggest difficulties for proteomic studies is that the majority of serum protein mass consists of only a few proteins. Albumin and Immunoglobulin (IgG) constitute 80% of total serum protein. In this study, dye ligand affinity-based hydrogel membranes were proposed as new materials with micron mesh structures. Micron mesh p(HEMA) hydrogel membranes were synthesized by using the UV-photopolymerization method, then modified with Reactive Red 241 (RR241) dye ligand to increase the affinity towards IgG. Characterizations of synthesized micron mesh p(HEMA)-RR241 hydrogel membranes were also performed. It was demonstrated by the characterization studies that; the dye was successfully incorporated into the membrane structure with the amount of 119.38 mg/g. The hydrophilic property of the hydrogel membrane was demonstrated by swelling tests and the swelling value of dye modified membrane was found to be 8 times higher than that of the plain membrane. Micron network structure, as well as the porosity, were demonstrated with SEM/ESEM studies. Optimization of IgG adsorption conditions was also studied at different parameters (pH, temperature, ion strength, initial IgG concentration). Optimum pH, temperature, and ionic strength were found to be 6.5, 25 °C, 0.05 M, respectively, and the maximum IgG absorption value was 10.27 mg/g. Finally, it was shown that the proposed materials can be used repeatedly by 5 adsorption-desorption cycles.

Study of silanized nanostructures with immobilized fumarase for production of L-malate.

The conversion of fumaric acid into L-malate by fumarase immobilized on silanized nanostructures was analyzed experimentally. The enzyme was bound to the silanized nanostructures. We carried out scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FTIR) analysis, zeta size analysis and surface area calculation for the characterization of the nanostructures. The effect of initial enzyme concentration and pH on immobilization procedure were investigated and the change of Michaelis-Menten constants (Km and Vmax) with immobilization was examined. The change in the storage stability of the enzyme by immobilization was also investigated. The stability of the immobilized enzyme was very good. We observed that the fumarase was bound to silanized nanostructures [p(HEMA)-3-MTES] in much greater amounts. We have compared the activities of free fumarase and immobilized fumarase and we have observed a significant increase in the activity of the fumarase after immobilization for L-malate production. Moreover, we came to the conclusion that this activity can be better preserved for 30 days compared to free fumarase.

Selective nanosensor based on folic acid imprinted nanostructures.

Folic acid, which provides the transfer of single carbon atoms in synthesis reactions and metabolic cycles in metabolism, is very important for metabolism. Folic acid also plays an important role in nucleotide synthesis and methylation reactions. There are many disorders caused by defective folic acid metabolism and lack of folic acid. Today, innovative, cost-effective methods are needed to develop folic acid determination methods. The main objective of this study is the development of surface-printed carbon electrodes (SPCE) modified with folic acid imprinted nanostructures (FA-Imp-poly(MPTS-rGO-co-NAT), which will be used for the first time for folic acid determination in commercially human blood serum. For this purpose, the synthesis of nanostructures has been carried out and characterized by FTIR, SEM-EDS, and AFM. Then, a new chemically modified nanosensor was fabricated for the determination of folic acid using folic acid imprinted nanostructures. Differential pulse voltammetry (DPV) and circular voltammetry (CV) methods were used as electrochemical methods in the FA-imprinted-nanosensor studies. Measurements in differential pulse voltammetry were performed at an application speed of 0.005 volts per second in the potential range of -0.4 to 0.6 volts. As a result of the circular voltammetric method, an idea about the surface was obtained with the voltammograms obtained. The detection limit (LOD) of the developed FA-imprinted-nanosensor was 7.54 ng/mL and the determination limit (LOQ) was 25.14 ng/mL. FA analytical (10 and 20 ng/mL) was added to commercial synthetic serum samples by the standard adding method and RSD values of 0.092% and 0.734% were found in the DPV technique and measurements respectively. This manuscript demonstrated a novel, simple, selective, and rapid FA-imprinted-nanosensor for determining the FA in the biological samples.

The usage of composite nanomaterials in biomedical engineering applications.

Nanotechnology is still developing over the decades and it is commonly used in biomedical applications with the design of nanomaterials due to the several purposes. With the investigation of materials on the molecular level has increased the develop composite nanomaterials with exceptional properties using in different applications and industries. The application of these composite nanomaterials is widely used in the fields of textile, chemical, energy, defense industry, electronics, and biomedical engineering which is growing and developing on human health. Development of biosensors for the diagnosis of diseases, drug targeting and controlled release applications, medical implants and imaging techniques are the research topics of nanobiotechnology. In this review, overview of the development of nanotechnology and applications which is use of composite nanomaterials in biomedical engineering is provided.

A model study by using polymeric molecular imprinting nanomaterials for removal of penicillin G.

We aimed to develop a molecularly imprinted polymeric systems with using penicillin G as a template molecule for removal of the antibiotic residues from environmental samples. Firstly, Pen-G-imprinted poly (2-hydroxyethyl methacrylate-N-methacryloyl-L-alanine) [p(HEMA-MAAL)] nanopolymers were synthesized by surfactant-free emulsion polymerization method. Then, template molecule (Pen-G) was extracted from nanopolymers. Synthesized nanopolymers were characterized by different methods such as Fourier-transform infrared spectroscopy (FTIR), elemental and zeta-size analysis, scanning electron microscope (SEM), and surface area calculations. Nanopolymers have 60.38 nm average size and 1034.22 m2/g specific surface area. System parameters on Pen-G adsorption onto Pen-G imprint nanopolymers were investigated at different conditions. The specific adsorption value (Qmax) of molecularly impirinted p(HEMA-MAAL) nanopolymers was found 71.91 g/g for Pen-G in 5 mg/mL Pen-G initial concentration. Pen-G adsorption of molecularly imprinted nanopolymers was 15 times more than non-imprinted polymer. It is shown that obtained p(HEMA-MAAL) nanopolymer was a reuseable product which protected its adsorption capacity of 98.9% after 5th adsorption-desorption cycle. In conclusion, we suggest a method to develop a nanostructure, selective, low-cost molecularly imprinted polymeric systems with using penicillin G as a template molecule for removal of the antibiotic residues.

Synthesis, characterization and toxicity assessment of a new polymeric nanoparticle, l-glutamic acid-g-p(HEMA).

The toxic effects of poly(HEMA)-based polymeric nanoparticles must be analyzed before their biomedical applications as drug delivery systems. The aim of the study was to characterize and evaluate the toxicity for its biocompatibility of a newly synthesized l-glutamic acid-g-p(HEMA) polymeric nanoparticle The nanoparticle was synthesized with surfactant-free emulsion polymerization and grafting techniques. Grafting efficiency was estimated at 58%. The nanoparticle shape was verified as nearly spherical by scanning electron microscopy. Atomic force microscopy images showed a rough surface topography. The nanoparticle had an average size of ~194.6 nm on zeta analysis, and the zeta potential value was -18 mV. Fourier transformed infrared spectroscopy revealed spectra from 750 to 4000 cm-1 and characteristic peaks of stretching bands. The swelling ratio was 46%. With 24-h exposure, p(HEMA) and l-glutamic acid-g-p(HEMA) did not have cytotoxic effects on a human bronchial epithelial cell line (16HBE) and human monocyte cell line by water-soluble tetrazolium salt 1 (WST-1) assay and lactate dehydrogenase assay (LDH). It did not show genotoxic potential by comet assay and did not have mutagenic effects on Salmonella typhimurium TA98, TA100, TA1535 and TA1537 strains by Ames test. The nanoparticle at 160 µg/ml showed 2% hemolytic activity on erythrocytes. On cell migration assay, the percentage closure difference between exposed and control cells was estimated at 21%. We found no irritation effect on Hen's egg test-chorioallantoic membrane test. We determined that the polymeric nanoparticle l-glutamic acid-g-p(HEMA) was biocompatible and has potential for use in a drug delivery system.

A novel radiolabeled graft polymer: Investigation of the radiopharmaceutical potential using Albino Wistar rats.

Fe3O4 magnetic graft-Lys-poly(HEMA) was synthesized, labeled with 99mTc for the first time and its radiopharmaceutical potential was investigated using animal models in this study. Quality control procedures were carried out using thin layer radiochromatography. The labeling yield of radiolabeled polymer was found to be about 100%. Then, stability and lipophilicity were determined. The lipophilicity of 99mTc labeled Fe3O4 graft-Lys-poly(HEMA) was found to be 3.77. The serum stability experiments demonstrated that approximately 100% of radiolabeled polymer existed as an intact complex in the rat serum within 240 min. Biodistribution of radiolabeled magnetic graft-Lys-poly(HEMA) was performed on female Albino Wistar rats by scintigraphy and biodistribution studies. High uptake was seen in the stomach, the pancreas, brain, ovarian, intestines and the breast.

Quercetin adsorption with imprinted polymeric materials.

In this study, molecularly imprinted polymer membranes were synthesized for the recognition and adsorption of quercetin. For this, quercetin imprinted polymeric membranes [p(HEMA-MAH)] (Poly(2-hydroxyethyl methacrylate-co-N-methacryloly-l-histidinemethylester) were synthesized by UV polymerization technique using HEMA and MAH as monomers. Synthesized polymeric membranes were characterized with SEM, FTIR and swelling test. Characterized membranes were used for the direct adsorption of quercetin in a batch system. Quercetin adsorption conditions were optimized by using the quercetin imprinted polymeric membrane by altering the pH, temperature and initial quercetin concentration of the adsorption medium. Effect of adsorption time was also studied for up to 180 min. The optimum pH and temperature was determined between 4.0 and 45 °C. Maximum adsorbed amount of quercetin onto quercetin imprinted poly(HEMA-MAH) membrane was found to be as 299.6 mg/g membrane using the initial quercetin concentration of 2.0 mg/ml. Adsorbed quercetin was desorbed from the polymeric membranes with isopropyl alcohol with desorption yield of 98.3%. and repeated usability of the quercetin imprinted polymeric membranes was fallowed for 7 adsorption/desorption cycles. At the end of the 7th reuse, quercetin adsorption capacity of the quercetin imprinted poly(HEMA-MAH) membranes decreased only about 10%.

Synthesis and characterization of albumin imprinted polymeric hydrogel membranes for proteomic studies.

In this presented study, a novel molecularly imprinted polymeric hydrogel membranes (PHMs) were developed to use for the albumin depletion studies. For this, albumin imprinted poly(2-hydroxyethyl methacrylate-N-methacryloyl-(L)-phenylalanine methyl ester) polymeric hydrogel membranes [p(HEMA-MAP) PHMs] were synthesized by the photopolymerization technique, and then characterized by SEM, EDX, FT-IR and swelling studies. Synthesized PHMs had spherical structure and the MAP monomer incorporation onto the PHMs was determined by EDX analysis by using nitrogen stoichiometry. Also, the swelling ratio of the albumin imprinted p(HEMA-MAP) PHMs was determined as 215%. The optimum albumin adsorption condition (adsorption capacity, medium pH, adsorption rate, temperature, ionic strength) were studied and the maximum albumin adsorption capacity was found to be as 34.28 mg/g PHMs. Selectivity experiments were also carried out with the presence of the competitive proteins such as lysozyme and amylase, and the results demonstrated that the albumin imprinted p(HEMA-MAP) PHMs showed high affinity towards the BSA molecules than the competitive proteins of lysozyme and amylase. Adsorbed albumin was desorbed from the PHMs by 1.0 M of NaCl, and the reusability of the imprinted PHMs was also demonstrated for five successive adsorption-desorption cycles without any significant loss in the albumin adsorption capacity. As an application, sodium-dodecyl sulfate polyacrylamide gel electrophoresis was used to indicate the albumin depletion efficiency of albumin imprinted p(HEMA-MAP) PHMs. This presented study showed that, these imprinted membranes are promising for proteomic studies and applications, and can be used for the investigations for human diagnostics.

Antibody separation using lectin modified poly(HEMA-EDMA) hydrogel membranes.

Herein we describe the synthesis of Concanavalin A-poly(2-hydroxyethyl methacrylate-ethylene dimethacrylate) hydrogel membranes (via photopolymerization technique) for antibody separation from aqueous solutions. Different characterization techniques including Scanning Electron Microscopy, Fourier Transform Infrared Spectroscopy, Elemental Analysis and swelling tests revealed the highly rough morphology and spherical shape of the synthetized membranes. Attached amount of IMEO (salinization agent) onto polymeric structure and Con A binding capacity were found to be 10.85 mol/g and 3.52 mg/g, respectively. Optimum conditions for IgG adsorption such as adsorption capacity, pH and reusability profile of HMs were judiciously characterized. Maximum IgG adsorption capacity of hydrogel membrane was found to be as 26.81 mg/g. Adsorbed IgG was eluted successfully by using 2.0 M of NaCl solution. Reusability profiles of hydrogel membrane in five adsorption-desorption cycles revealed that there was no significant decrease in IgG adsorption capacity at the end of the 5th reuse. The hydrogel membranes reported here hold considerable promise as an effective sorbent system for IgG adsorption with good stability and efficient repeated usage.

DNA isolation by galactoacrylate-based nano-poly(HEMA-co-Gal-OPA) nanopolymers.

Isolation of DNA is one of the important processes for biotechnological applications such as investigation of DNA structures and functions, recombinant DNA preparations, identification of genetic factors and diagnosis and treatment of genetic disorders. The aim of this study was to synthesis and characterizes the galactoacrylate based nanopolymers with high surface area and to investigate the usability of these synthesized nanopolymers for DNA isolation studies. Nanopolymers were synthesized by the surfactant free emulsion polymerization technique by using the monomers of 2-hydroxyl ethylmethacrylate and 6-O-(2'-hydroxy-3'-acryloyloxypropyl)-1,2:3,4-di-O-isopropylidene-α-D-galactopyranose. Galactoacrylate origin of these newly synthesized nanopolymers increased the interaction between DNA and nanopolymers. Prepared nanopolymers were characterized by SEM, FT-IR and ZETA sizer analysis. Synthesized nanopolymers were spherical, and their average particle size was about 246.8 nm. Adsorption of DNA onto galactoacrylate based nanopolymers was investigated by using different pHs, temperatures, ionic strength, DNA concentrations and desorption studies and maximum DNA adsorption was found to be as 567.12 mg/g polymer at 25 °C, in pH 5.0 acetate buffer. Reusability was investigated for 5 successive reuse and DNA adsorption capacity decreased only about 10% at the end of the 5th reuse.